Page1  Page2  Page3  Page4     Page6


.: Microcruiser Refit

undercon.jpg - 9651 Bytes


str84t.jpg - 5411 Bytes

After a lot of sanding, scraping and grinding, we eventually decided to remove the whole bottom because of extensive dry rot.

str83t.jpg - 7681 Bytes

Now that the old bottom is off, we will replace it with new 1/2" plywood.

str85t.jpg - 4421 Bytes

strud1t.jpg - 3588 Bytes

A new rudder blade was made from scrap plywood.  Note the lead ballast.

Rotted floor timbers removed.

5 new floor timbers added.


All Contents © David and Mindy Bolduc